Auto Headlight Beam Leveler System: Procedure: Initialization
- Check that the indicator in the meter is flashing twice repeatedly with the ignition switch ON.
- Turn the ignition switch to OFF.
- Bounce the vehicle several times to normalize the suspension.
- Make certain that someone is seated in the driver's seat.
- Turn the ignition switch to ON, and, within 1.5 to 20 seconds, turn the headlight switch OFF - ON three times.
- Make sure that the indicator in the meter flashes three times and then turns OFF, indicating that initialization has been successfully completed. (At this time, the headlight beam drops once, and then returns to the original position.)
- Perform beam adjustment for the headlight. Refer to LIGHTING SYSTEM>HEADLIGHT ASSEMBLY>ADJUSTMENT .