Front Turn Signal Light Assembly: Installation

CAUTION: Install the mud guard - front so that the front end of the mud guard (b) comes outside the bumper face - front (a).

Courtesy of SUBARU OF AMERICA, INC.

NOTE: Front turn signal light assembly of the LED headlight is integrated into the headlight assembly. For operation procedures, refer to "Headlight Assembly". Refer to LIGHTING SYSTEM>HEADLIGHT ASSEMBLY .

Install the turn signal light assembly - front.
Tightening torque:

7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the mud guard - front.
Lower the vehicle.
Install the cover - fog light.
Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .