Spot Map Light: Inspection

Measure the resistance between connector terminals.

Preparation tool:

Circuit tester

Models without EyeSight

Model without sunroof

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
2 - 3	Switch OFF	1 MΩ or more
2 - 3	Switch ON	Approx. 18 Ω

Model with sunroof

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 4	Switch OFF	1 MΩ or more
1 - 4	Switch ON	Approx. 18 Ω

Models with EyeSight

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
1 - 13	Switch OFF	1 MΩ or more
1 - 13	Switch ON	Approx. 18 Ω

Replace the light assembly - map if the inspection result is not within the standard value.