VDC OFF Switch: Inspection

Remove the VDC OFF switch. Refer to VEHICLE DYNAMICS CONTROL(VDC)>VDC OFF SWITCH>REMOVAL .

Measure the resistance between the VDC OFF switch terminals.

Preparation tool:

Circuit tester

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Standard
5 - 6	Switch OFF	1 MΩ or more
5 - 6	Switch ON	Less than 1 Ω

NOTE: Replace the VDC OFF switch if the inspection result is not within the standard value.

Install the VDC OFF switch. Refer to VEHICLE DYNAMICS CONTROL(VDC)>VDC OFF SWITCH>REMOVAL .