| Drive pinion bearing preload (for new bearing) |
Measured with spring measurement (measured from the companion flange bolt) N (kgf, lbf) |
T-type |
24.1 - 38.6 (2.5 - 3.9, 5.4 - 8.7) |
| VB3-type |
12.7 - 32.2 (1.3 - 3.3, 2.9 - 7.2) |
| Measured with torque wrench N.m (kgf-m, ft-lb) |
T-type |
0.98 - 1.57 (0.10 - 0.16, 0.72 - 1.16) |
| VB3-type |
0.48 - 1.22 (0.05 - 0.12, 0.35 - 0.90) |
| Differential bevel gear and differential bevel pinion backlash mm (in) |
VB3-type |
0.13 - 0.18 (0.005 - 0.007) |
| Hypoid driven gear to drive pinion backlash mm (in) |
T-type |
0.10 - 0.20 (0.004 - 0.008) |
| VB3-type |
0.10 - 0.15 (0.004 - 0.006) |
| Hypoid driven gear runout on its back surface mm (in) |
T-type |
0.05 (0.002) |
| Companion flange mating surface runout mm (in) |
0.08 (0.003) |
| Companion flange runout on its inner surface mm (in) |
0.08 (0.003) |
| Total preload (measured from the companion flange bolt hole) N (kgf, lbf) |
T-type |
26.5 - 53 (2.7 - 5.4, 6.0 - 11.9) |