FixVault

Rear Speaker: Installation

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the speaker assembly rear, and connect the connector.
    CAUTION:

    Do not touch the cone. 

    NOTE:

    If the threaded portion of grommet is faulty, replace the grommet with a new part. 

  2. Install the trim panel rear door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY