FixVault
Home › Subaru › 2021 › WRX Base › Repair and Diagnosis › External Pages › Different car › Section 35 (Front Suspension And Wheel Alignment) › G Sensor › Removal

G Sensor: Removal

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  3. Remove the harness bracket.
    1. Disconnect the connector.
    2. Remove the bolts and then remove the harness bracket together with the G sensor.
    G14601776Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the G sensor.
    1. Remove the connector clip.
    2. Remove the bolts, and then remove the G sensor.
    G14601777Courtesy of SUBARU OF AMERICA, INC.
About FixVault