Stabilizer Bushing
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Install the rubber bushing stabilizer rear so that the slit does not shift to the right or left.
- Install the clamp stabilizer with the peak of triangle facing the front of the vehicle.
- Before installation, check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
- Install the rubber bushing stabilizer rear.
- Install the clamp stabilizer.
Tightening torque:
30 N.m (3.1 kgf-m, 22.1 ft-lb)