FixVault
Home › Subaru › 2021 › WRX STI › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (2.5L) › Oil Flow Control Solenoid Valve › Removal › Intake Side

Intake Side

  1. Disconnect the ground terminal from battery.
  2. Remove the intake manifold. Refer to FUEL INJECTION (FUEL SYSTEMS) (STI)>INTAKE MANIFOLD>REMOVAL .
  3. Remove the oil flow control solenoid valve.
    • RH
      G13640114Courtesy of SUBARU OF AMERICA, INC.
    • LH
    G13640115Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil return cover.
    NOTE: Perform this procedure only when it is necessary.
    • RH
      G13640116Courtesy of SUBARU OF AMERICA, INC.
    • LH
    G13640117Courtesy of SUBARU OF AMERICA, INC.
About FixVault