Reverse Check System: Inspection

Check that there is no damage on any parts.
Check that the reverse check lever is operating smoothly.
Inspect that there is no oil leak at the oil seal section of the reverse check shaft. If there is oil leakage, replace the oil seal.

Check the operation of the reverse check.

When the reverse check lever is in the following position, the reverse check plunger is pressed, or the gear can shift into reverse.

Courtesy of SUBARU OF AMERICA, INC.

When the reverse check lever is in the following position, the reverse check plunger is not pressed, or the gear cannot shift into reverse.

Courtesy of SUBARU OF AMERICA, INC.