Inspection Mode 2
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| DTC | Item | Note |
|---|---|---|
| B1412 | IMMOBILIZER CONTROL MODULE CAN REGISTER STUCK | - |
| B1414 | IMMOBILIZER CONTROL MODULE NONVOLATILE MEMORY | - |
Diagnostic procedure:
- Using the Subaru Select Monitor, perform the clear memory of [Immobilizer]. Ref. to COMMON (diag)>CLEAR MEMORY .
- Using the Subaru Select Monitor, read the DTC of [Immobilizer] to check that there is no DTC displayed. Ref. to IMMOBILIZER (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1).
- Disconnect and reconnect the battery, and then wait for 60 seconds or more.
- Turn the ignition switch to ON.
- Using the Subaru Select Monitor, read the DTC of [Immobilizer] to check that there is no DTC displayed. Ref. to IMMOBILIZER (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.