Throttle Body: Installation
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Set a new gasket, and install the throttle body together with the throttle body stay.
Tightening torque:
8 N.m (0.8 kgf-m, 5.9 ft-lb)
- Connect the preheater hose (B).
- Connect the connector (A).
- Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Fill engine coolant. Ref. to COOLING (H4DOTC)>Engine Coolant>REPLACEMENT>FILLING OF ENGINE COOLANT .