Before Overhaul
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the torque converter. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Torque Converter>REMOVAL .
- Remove the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Air Breather Hose>REMOVAL .
- Install the ST and place the transmission body.NOTE:
- When attaching the ST to the (a) positions, spacers or similar of 2.0 mm (0.08 in) or more in thickness are necessary.
- Prepare a container for draining of oil, because CVTF remaining inside the transmission body may flow out from the input shaft portion.
Preparation tool:
ST: STAND ASSY (18632AA000)