FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 17 (CVT Transaxle System) › Rear Drive Shaft › Installation

Rear Drive Shaft: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Select the thrust bearing. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Rear Drive Shaft>ADJUSTMENT .
  2. Install the selected thrust bearing to transfer clutch.
    NOTE: Install the thrust bearing in the correct direction.
    G13200125Courtesy of SUBARU OF AMERICA, INC.
  3. Install the rear drive shaft.
  4. Install the extension case. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Extension Case>INSTALLATION .
  5. Install the transmission body. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>Transmission Assembly>INSTALLATION .
About FixVault