FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 20 (Brake System) › Brake Pipe › Installation › Center Brake Pipe

Center Brake Pipe

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pipe center brake rear. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel Delivery and Evaporation Lines>INSTALLATION .
  2. Install the fuel tank. INSTALLATION Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>INSTALLATION.
  3. Install the rear suspension assembly. Ref. to REAR SUSPENSION>Upper Arm>INSTALLATION .
  4. Install the propeller shaft. Ref. to PROPELLER SHAFT/DRIVE SHAFT/AXLE>Propeller Shaft>INSTALLATION .
  5. Install the rear exhaust pipe. Ref. to EXHAUST (H4DOTC)>Rear Exhaust Pipe>INSTALLATION .
  6. Install the under cover rear RH. Ref. to EXTERIOR/INTERIOR TRIM>Floor Under Protector>INSTALLATION .
  7. Install the fuel tank protector. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel Tank Protector>INSTALLATION .
  8. Install the rear wheels.

    Tightening torque:  

    120 N.m (12.2 kgf-m, 88.5 ft-lb)

  9. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault