Inspect The Specified Position
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the clearance between the end of the stop light switch assembly and the stopper. CAUTION: Be careful not to rotate the stop light switch assembly.
Stop light switch assembly clearance A:
1.5 mm (0.06 in)
- Adjust the position of the stop light switch assembly if the inspection result is not within the standard value. Ref. to BRAKE>Stop Light Switch> ADJUSTMENT .
- If the stop light switch assembly does not operate properly or it is not secured at the specified position after adjustment, replace the stop light switch assembly.