FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 22 (Vehicle Dynamics Control (VDC) System) › Auto Vehicle Hold Switch › Installation

Auto Vehicle Hold Switch: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the AVH switch.
  2. Install the switch panel front. Ref. to EXTERIOR/INTERIOR TRIM>Center Console>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
    NOTE: After connecting the ground terminal to the battery sensor, place the select lever in the "P" position.
About FixVault