FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 35 (Wiper System & Washer System) › Combination Switch (Wiper) › Installation

Combination Switch (Wiper): Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch assembly combination wiper select, and connect the connector.
  2. Install the column cover assembly.
  3. Connect the ground terminal to battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault