FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 37 (Power Rear Gate System) › Power Rear Gate Inner Switch › Installation

Power Rear Gate Inner Switch: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power rear gate inner switch and the power rear gate lock switch.
  2. Install the cap panel rear gate switch.
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault