FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 37 (Power Rear Gate System) › Power Rear Gate Touch Sensor › Installation

Power Rear Gate Touch Sensor: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power rear gate touch sensor.
  2. Install the stopper rubber rear gate.
  3. Install the trim panel assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>Rear Gate Trim>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault