Access Key Battery
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
Measure the access key battery voltage.
Preparation tool:
Circuit tester
NOTE:
Complete the measurement within 5 seconds because the access key battery discharges during measurement.
| Battery terminal | Inspection conditions | Standard |
|---|---|---|
| (+) - (-) | Connect resistor (A) 47 Ω | 2.5 - 3 V |
Replace the access key battery if the inspection result is not within the standard value. (Use CR2032 or equivalent.)