Keyless Buzzer: Installation
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Install the mud guard front so that the front end of the mud guard (b), except for the clip fixing point, comes inside the bumper face (a)
.
- Install the keyless buzzer.
- Install the mud guard front.
- Install the under cover front.
Tightening torque:
18 N.m (1.8 kgf.m, 13.3 ft.lb)
- Lower the vehicle.
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .