FixVault
Home › Subaru › 2022 › Ascent Base › Repair and Diagnosis › External Pages › Different car › Section 4 (Anti-Theft System - Security And Locks) › Push Button Ignition Switch › Installation

Push Button Ignition Switch: Installation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the switch assembly starter.
  2. Install the panel starter switch.
  3. Install the visor assembly.
  4. Install the grille ventilation assembly center LH. Ref. to AIR CONDITIONERS>Air Vent Grille>INSTALLATION .
  5. Install the cover LWR driver.
  6. Connect the ground terminal to battery sensor, Ref. to REPAIR CONTENTS>NOTE>BATTERY .
About FixVault