Stabilizer Bushing
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Before installation, inspect the following items and replace any faulty part with a new one.
Check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.
- Install the rubber bushing stabilizer front.
- Install the clamp stabilizer.
Tightening torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Install the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>Center Exhaust Pipe>INSTALLATION>CENTER EXHAUST PIPE (REAR) .
- Install the under cover front.
Tightening torque:
18 N.m (1.8 kgf-m, 13.3 ft-lb)