Wilderness Model
| Suspension height (Tolerance: +12 mm-24 mm (+0.47 in-0.94 in )) |
mm (in) | -89 (-3.5) |
| Camber (tolerance: ±0°45' Differences between RH and LH: 45' or less) | -0°35' | |
| Toe-in | mm (in) | 0±3 (0±0.12) Toe angle (sum of both wheels): 0°±0°15' |
| Thrust angle (tolerance: ±30') | 0°00' | |
NOTE:
- Adjust with the value less than the inspection value, taking aging variation into consideration.
- Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds the tolerance range of the specification chart.
- Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart cannot be adjusted.
- If other items exceed the tolerance range of the specification chart, check the suspension parts and connections for deformation. If defective, replace them with new parts.
A - B = Positive: Toe-in, Negative: Toe-out
α = Individual toe angles