Front Fog Light Assembly: Inspection

Apply battery voltage between the connector terminals to check the lighting condition of the light.

CAUTION:

When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.

Incorrect polarity connection may cause internal LED damage.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Inspection conditions	Specification
2 (+) - 1 (-)	Apply battery voltage.	Light ON

Replace the fog light assembly front if faulty is found in the inspection.
NOTE:
Since LED (Light Emitting Diode) is used for the light, replace the fog light assembly front if the light does not illuminate.