FixVault
Home › Subaru › 2022 › Outback Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 6 (Engine Intake System (Induction) And Turbocharger (2.4L)) › Air Intake Boot › Removal

Air Intake Boot: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the turbo duct from the air cleaner case (rear).
    G13619977Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the under cover front Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL
  3. Disconnect the air intake boot from the intake duct No. 1.
    G13619978Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the clips and turn over the front mud guard RH.
    G13619979Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the turbo duct and the air intake boot as a single unit.
    G13619980Courtesy of SUBARU OF AMERICA, INC.
  6. Disconnect the turbo duct and the air intake boot.
    NOTE: Perform this procedure only when required.
    G13619981Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the cushion from the turbo duct bracket, and remove the turbo duct bracket.
    NOTE: Perform this procedure only when required.
    G13619982Courtesy of SUBARU OF AMERICA, INC.
About FixVault