Before Overhaul

WARNING: This page is about a different variant/trim than selected.

Remove the torque converter. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>TORQUE CONVERTER>REMOVAL .
Remove the air breather hose. Ref. to CONTINUOUSLY VARIABLE TRANSMISSION (TR690)>AIR BREATHER HOSE>REMOVAL .
Attach the ST.
NOTE:
When attaching the ST to the (a) positions, spacers or similar of 2.0 mm (0.08 in) or more in thickness are necessary.

Preparation tool:

ST: STAND ASSY (18632AA000)

Courtesy of SUBARU OF AMERICA, INC.
Place the transmission body.
NOTE:
Prepare a container for draining of oil, because CVTF remaining inside the transmission body may flow out from the input shaft portion.