FixVault
Home › Subaru › 2022 › WRX Base, Automatic CVT Trans › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) System › Rear ABS Wheel Speed Sensor › Removal › Standard Damper Model

Standard Damper Model

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the rear wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>REMOVAL .
  3. Remove the sensor sub assembly rear.
    CAUTION:
    • Be careful not to damage the sensor. 
    • Do not apply excessive force to the sensor harness. 
    1. Disconnect the sensor sub assembly rear connector.
    2. Remove the bolt and harness clip, and remove the sensor sub assembly rear.
    G14602129Courtesy of SUBARU OF AMERICA, INC.
About FixVault