Starter Relay: Inspection
- Check that the starter relay and starter cut relay do not have deformation, cracks and any other damage.
- Measure the resistance between the starter relay and starter cut relay terminals.
- Starter relay
| Terminal No. | Inspection conditions | Standard |
|---|---|---|
| 3 - 4 | Always | 1 MΩ or more |
| 3 - 4 | Apply battery voltage between terminals 1 and 2. | Less than 1 Ω |
- Starter cut relay
| Terminal No. | Inspection conditions | Standard |
|---|---|---|
| 3 - 4 | Always | 1 MΩ or more |
| 3 - 4 | Apply battery voltage between terminals 1 and 2. | Less than 1 Ω |