Rear Wheel Speed Sensor: Installation

CAUTION:

If water or oil contacts the connector terminal of rear wheel speed sensor, replace it with a new part.

Install the rear wheel speed sensor using a new O-ring, and connect the connector.
NOTE:
Apply CVTF to the O-rings.

Tightening torque:

5 N.m (0.5 kgf-m, 3.7 ft-lb)
Install the center exhaust cover. Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>INSTALLATION
Install the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>INSTALLATION>CENTER EXHAUST PIPE (REAR)
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY