FixVault
Home › Subaru › 2022 › WRX Base, Standard Trans › Repair and Diagnosis › Body & Frame › Windows › Window Glass & Mirrors › Front Regulator and Motor Assembly › Installation

Front Regulator and Motor Assembly: Installation

CAUTION:

Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION 

  1. Install the regulator & motor assembly front, and connect the connector.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the glass assembly front door. Ref. to GLASS/WINDOWS/MIRRORS>FRONT DOOR GLASS>INSTALLATION>FRONT DOOR GLASS 
  3. Install the sealing cover door front. Ref. to EXTERIOR BODY PANELS>SEALING COVER>INSTALLATION>FRONT SEALING COVER
  4. Install the trim panel front door. Ref. to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION>FRONT DOOR
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  6. Perform the initial setting of the power window system. Ref. to GLASS/WINDOWS/MIRRORS>POWER WINDOW SYSTEM>OPERATION 
About FixVault