FixVault
Home › Subaru › 2022 › WRX Base, Standard Trans › Repair and Diagnosis › Engine Mechanical › Cooling Fan › Engine Cooling System › Radiator › Disassembly

Engine Cooling System: Radiator: Disassembly

  1. Remove the radiator main fan and fan motor. Ref. to COOLING (H4DOTC)>RADIATOR MAIN FAN AND FAN MOTOR>REMOVAL .
  2. Remove the radiator sub fan and fan motor. Ref. to COOLING (H4DOTC)>RADIATOR SUB FAN AND FAN MOTOR>REMOVAL .
  3. Remove the over flow hose (A) and radiator inlet hose (B).
    G14601417Courtesy of SUBARU OF AMERICA, INC.
  4. Peel off the radiator upper gasket (A), radiator lower gasket (B), radiator side gasket RH (C), and radiator side gasket LH (D).
    NOTE:

    This procedure is required only when the radiator upper gasket, radiator lower gasket, radiator side gasket RH, and radiator side gasket LH are to be replaced. 

    G14601418Courtesy of SUBARU OF AMERICA, INC.
About FixVault