Wheel Alignment: Inspection: Camber
- Place the tires on the turning radius gauge.NOTE:
Make sure that the ground contact surfaces of the front tires and rear tires are at the same level.
- Set the alignment gauge adapter into the center of wheel, and then set the alignment gauge.
- Measure the camber angle in accordance with the operation manual for alignment gauge.
| Model | Front camber (difference between RH and LH 45' or less) | Rear camber (difference between RH and LH 45' or less) |
|---|---|---|
| 17-inch model | -0°40'±45' | -1°25'±45' |
| 18-inch model | -0°40'±45' | -1°35'±45' |