When Using Cleaning Tools

CAUTION: Be careful not to stain the stereo camera lens or impact and damage it.

Remove the cover assembly stereo camera. Ref. to EYESIGHT>STEREO CAMERA>REMOVAL .
Remove the lens hood. Ref. to EYESIGHT>LENS HOOD>REMOVAL>STEREO CAMERA .

Clean the windshield glass.

Install ST on the stereo camera.

Preparation tool:

ST: TOOL ADA COVER (87599VC000)

1. Align the ST pivot axis with the stereo camera pivot axis.

Courtesy of SUBARU OF AMERICA, INC.

(A)	Pivot axis
(B)	Stopper

2. Turn ST in the arrow direction so that it is level.

NOTE: Turn ST until its stopper comes in contact with the stereo camera unit.

Courtesy of SUBARU OF AMERICA, INC.

3. Secure the stereo camera and ST with masking tape.

CAUTION: Do not touch the camera lens. If touched, replace the stereo camera.

Clean the windshield glass.

1. Wrap the tip of the remover, etc. with a dry clean cloth.

2. Put it between the windshield glass and ST for cleaning.

NOTE: Clean the area shown in the figure.

Courtesy of SUBARU OF AMERICA, INC.

(a)	Cleaning area
(b)	Ceramic line end

Courtesy of SUBARU OF AMERICA, INC.

(A)	Ceramic line
(B)	Remover tip

Remove the masking tape, and remove ST from the stereo camera.
CAUTION: Do not touch the camera lens. If touched, replace the stereo camera.

Install the lens hood. Ref. to EYESIGHT>LENS HOOD>INSTALLATION > STEREO CAMERA .
Install the cover assembly stereo camera. Ref. to EYESIGHT>STEREO CAMERA>INSTALLATION .