Rearview Camera Assembly

Install the rearview camera assembly.
NOTE: Press-in the rearview camera assembly until a locking sound is heard.
Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Confirm the display and the guide line position, and adjust them as necessary.
- Model without front/side view cameras
  Screen display check: Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CUSTOMIZE .
  
  Guide line position check: The rearview camera or its installation location on the vehicle may be deformed. Check the rearview camera assembly and its installation location on the vehicle, and repair or replace if necessary.
- Model with front/side view cameras
  Screen display: Ref. to 360-DEGREE SURROUND VIEW MONITOR/MULTI VIEW MONITOR (DIAGNOSTICS)>CUSTOMIZE .
  
  Guide line position: Ref. to 360-DEGREE SURROUND VIEW MONITOR/MULTI VIEW MONITOR (DIAGNOSTICS)>WORK SUPPORT .
Perform calibration of the rearview camera assembly. (Model with front/side view cameras) Ref. to ENTERTAINMENT & MONITORING>CAMERA>ADJUSTMENT .