Sunroof Control System: Operation: Initialization
Initialization of the glass roof control module and the shade control module that have not been initialized will restore the auto-open/auto-close control and the auto-reverse function.
NOTE:
This procedure is required when replacing the motor assembly with a new part. For reinitialization required when removing/installing the parts of motor assembly and frame sunroof, refer to "Reinitialization of glass roof control module" and "Reinitialization of shade control module".
- Reinitialization of glass roof control module: Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF CONTROL SYSTEM>OPERATION>REINITIALIZATION OF GLASS ROOF CONTROL MODULE .
- Reinitialization of shade control module: Ref. to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>SUNROOF CONTROL SYSTEM>OPERATION>REINITIALIZATION OF SHADE CONTROL MODULE .
- Turn the ignition switch to ON.
- Push the sunroof switch to the OPEN side, and hold it until step 4.NOTE: When the sunroof switch is pushed to the OPEN side, the shade assembly moves in the OPEN direction first, and after about 1 second, the lid assembly front moves in the OPEN direction.
- The lid assembly front and the shade assembly move to the fully open mechanical lock position, and then reverse and stop at the fully open position.
- The lid assembly front and the shade assembly stop at the fully open position respectively and initialization will be completed.
NOTE:
For the operation order of lid assembly front and shade assembly initialization, refer to the following figure.
| (A) | Fully close position |
| (B) | Intermediate position |
| (C) | Fully open position |
| (D) | Fully open mechanical lock position |
| (a) | Lid ASSY front |
| (b) | Lid ASSY rear |
| (c) | Shade ASSY |