Power Seat & Remote Control Mirror Control Module (Model With Seat Position Memory)
- Prior to starting work, check the following precautions. Ref. to SEATS>GENERAL DESCRIPTION>CAUTION .
- Operate the switch to move the front seat (driver's seat) to the following positions.
- Slide: rearmost end
- Reclining: most upright
- Lifter: downmost end
- Tilt: downmost end
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Remove the driver's seat from the vehicle.
- Remove the power seat & remote control mirror control module.
- Disconnect the connector.
- Remove the nuts and remove the power seat & remote control mirror control module.
 Courtesy of SUBARU
|