FixVault
Home › Subaru › 2023 › Forester Base › Repair and Diagnosis › Electrical › Gauges › Instrumentation System & Driver Information Center › Driver Monitoring Unit › Removal

Driver Monitoring Unit: Removal

CAUTION: When replacing the driver monitoring unit, perform the variant work. Ref. to DRIVER MONITOR (DIAGNOSTICS)>WORK SUPPORT>OPERATION .
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the grille ventilation assembly center. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE .
  3. Remove the panel center UPR, and remove the audio assembly or navigation assembly. Ref. to ENTERTAINMENT & MONITORING>AUDIO>REMOVAL .
  4. Remove the multi-function display. Ref. to INSTRUMENTATION/DRIVER INFO>MULTI-FUNCTION DISPLAY (MFD)>REMOVAL .
  5. Remove the driver monitoring unit.
    CAUTION: Be careful not to damage the driver monitoring unit.
    1. Disconnect the claws and then remove the panel display LWR.
      G13226696Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the screws to remove the driver monitoring unit.
      CAUTION: Do not disconnect the connector on the driver monitoring unit.
      G13226697Courtesy of SUBARU OF AMERICA, INC.
About FixVault