Rear Window Glass: Removal
CAUTION:
- Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
- Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
- Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the rear seat cushion assembly and pad rear side. Ref. to SEATS>REAR SEAT>REMOVAL .
- Remove the trim panel assembly rear shelf. Ref. to EXTERIOR/INTERIOR TRIM>REAR SHELF TRIM>REMOVAL .
- Remove the light assembly high-mounted. Ref. to LIGHTING SYSTEM>HIGH-MOUNTED STOP LIGHT>REMOVAL>SEDAN MODEL .
- Disconnect the rear defogger connector and the antenna connector.
- Remove the glass rear window in the same procedure as for the glass front window. Ref. to GLASS/WINDOWS/MIRRORS>WINDSHIELD GLASS>REMOVAL .