Seat Belt

Check installation condition of seat belt.
Pull out the seat belt and then release it. Check that the belt retracts smoothly.
For the rear seat center belt, check that the belt retracts smoothly while placing the tongue on your palm. (Except for sedan model)
Check seat belt warning function.
1. Turn the ignition switch to ON with the driver's, passenger's and rear seat belts detached.
2. Check the driver's and passenger's seat belt warning light blink for approx. 6 seconds and the buzzer sounds intermittently.
3. Then, check the seat belt warning light illuminates and blinks repeatedly at a cycle of approx. 15 seconds. (If no passenger is on the passenger's seat, the seat belt warning light on passenger's seat does not operate.)
4. Check that the rear seat belt warning light illuminates. (If no passenger is on the rear seat, the seat belt warning light for rear seat does not operate.)
5. Then, check that the rear seat belt warning light turns off when the rear seat belts are fastened.