FixVault
Home › Subaru › 2023 › Outback Base › Repair and Diagnosis › Transmission › Automatic Trans › Continuously Variable Transmission (Diagnostics) (1 Of 2) › Inspection Mode › Procedure › Preparation For The Inspection Mode

Preparation For The Inspection Mode

  1. Check that the battery voltage is 12 V or more and fuel remains approx. half [20 - 40 L (5.3 - 10.6 US gal, 4.4 - 8.8 Imp gal)].
  2. After performing the diagnostics and clearing memory, check that no DTC remains.
NOTE:
  • Perform the inspection mode after warming up the engine except when the ATF temperature at engine start is specified.
  • DTC C0563 performs the inspection mode of "BRAKE CONTROL (DIAGNOSTICS)". Ref. to BRAKE CONTROL (DIAGNOSTICS)>INSPECTION MODE .
About FixVault