Rear Suspension System: Stabilizer: Installation: Stabilizer

CAUTION:

For the non-reusable parts, always use new parts.
Install the rubber bushing stabilizer rear so that the slit does not shift to the right or left.
Install the stabilizer clamp with the arrow mark facing upward.

Courtesy of SUBARU OF AMERICA, INC.

Before installation, inspect the following items and replace any faulty part with a new one.
- Check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
- Check the stabilizer link rear for damage.
Install the clamp stabilizer.
Tightening torque:

38 N.m (3.9 kgf-m, 28.0 ft-lb)
Install the stabilizer link rear (upper part).
Tightening torque:

55 N.m (5.6 kgf-m, 40.6 ft-lb)