Rear Suspension System: Stabilizer: Installation: Stabilizer
CAUTION:
- For parts which are not reusable, always use new parts.
- Install the rubber bushing stabilizer rear so that the slit does not shift to the right or left.
- Install the clamp stabilizer with the peak of triangle facing the front of the vehicle.
- Before installation, inspect the following items and replace any faulty part with a new one.
- Check the rubber bushing stabilizer rear for abnormal cracks, fatigue or damage.
- Check the stabilizer link rear for damage.
- Install the clamp stabilizer.
Tightening torque:
30 N.m (3.1 kgf-m, 22.1 ft-lb)
- Install the stabilizer link rear (upper part).
Tightening torque:
45 N.m (4.6 kgf-m, 33.2 ft-lb)