FixVault
Home › Subaru › 2024 › Ascent Base › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting System › Auto Headlight Beam Leveler Control Module › Removal

Auto Headlight Beam Leveler Control Module: Removal

  1. When replacing the auto headlight beam leveler Control Module, store the [Headlight / Foglight] customizing information. Ref. to COMMON (DIAGNOSTICS)>CUSTOMIZE>OPERATION > SAVE SETTINGS / READ SETTINGS
  2. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  3. Remove the auto headlight beam leveler Control Module.
    1. Disconnect the connector.
    2. Remove the nuts, and remove the auto headlight beam leveler Control Module.
      G13200867Courtesy of SUBARU OF AMERICA, INC.
About FixVault