FixVault
Home › Subaru › 2024 › Impreza Base › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Camera › Installation

Entertainment System: Camera: Installation

  1. Install the rearview camera assembly.
    1. Install the rearview camera assembly.
    2. Connect the connector.
  2. Install the garnish assembly rear gate. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE GARNISH>INSTALLATION .
  3. Install the spoiler assembly roof side. Ref. to EXTERIOR/INTERIOR TRIM>ROOF SPOILER>INSTALLATION .
  4. Install the trim panel assembly rear gate LWR. Ref. to EXTERIOR/INTERIOR TRIM>REAR GATE TRIM>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Confirm the display and the guide line position, and adjust them as necessary.
    • Screen display check: Ref. to COCKPIT CONTROL (DIAGNOSTICS)>CUSTOMIZE .
    • Guide line position check: The rearview camera or its installation location on the vehicle may be deformed. Check the rearview camera assembly and its installation location on the vehicle, and repair or replace if necessary.
About FixVault