FixVault

Preparation For Learning

  1. Connect the Subaru Select Monitor.
  2. Turn the ignition switch to ON. (Engine OFF)
  3. Display [ATF Temp.].
  4. Warm up until [ATF Temp.] reaches to 40 - 65°C (104 - 149°F).
  5. Turn the ignition switch to OFF.
  6. Lift up the vehicle.
    CAUTION:
    • Lift up the vehicle until the tire bottom is 0.3 m (0.98 ft) or more above the ground.
    • Make sure that safety is secured where the tiers rotate.
  7. Turn the ignition switch to ON. (Engine OFF)
  8. Turn OFF all of the following systems.
    • Headlight
    • Air conditioner
    • Seat heater
    • Rear defogger
    • Other systems causing an electrical load