Mt Model
- Check for smooth operation to each position. Especially, shift to 5th ←→ 6th and to reverse, and check for any stuck.
- Check the slider returns to the original position by shifting to the reverse and then back in neutral while pulling up the slider.
- If the shifting operation is not smooth, readjust the exposed length (a) of MT gear select cable by referring to the following figure.
| (a) | Exposed length of MT gear select cable |
| (A) | Extend direction of exposed length of MT gear select cable |
| (B) | Shorten direction of exposed length of MT gear select cable |
| (C) | Specification of exposed length (a) |
- If 5th or 6th gear cannot be selected (pressing to the reverse lock bracket):
→ Extend the exposed length (a) of MT gear select cable.
- If the gear shift lever does not move along the cranking line when it is operated from 4th → 5th gear:
→ Shorten the exposed length (a) of MT gear select cable.