Rear Wheel Speed Sensor: Installation

CAUTION: If water or oil contacts the connector terminal of rear wheel speed sensor, replace it with a new part.

Install the rear wheel speed sensor using a new O-ring, and connect the connector.
NOTE: Apply CVTF to the O-rings.

Tightening torque:

7 N.m (0.7 kgf-m, 5.2 ft-lb)
Install the center exhaust cover. Ref. to EXHAUST (H4DOTC)>REAR EXHAUST PIPE>INSTALLATION .
Install the center exhaust pipe (rear). Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>INSTALLATION>CENTER EXHAUST PIPE (REAR) .
Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .