FixVault
Home › Subaru › 2024 › WRX Limited, Automatic CVT Trans › Repair and Diagnosis (Single Page) › Accessories & Equipment › Infotainment › Entertainment System › Data Communication Module › Installation › Data Communication Module

Data Communication Module

  1. Install the backup battery. Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>BACKUP BATTERY .
  2. Install the data communication module and connect the cable CCM connector.
    CAUTION: Never install a data communication module from another vehicle. It may disable recognition of vehicle information and cause communication error.
  3. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION .
  4. Install the panel assembly center and the ornament panel mid passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Perform the registration if the data communication module is replaced with a new part. Ref. to ENTERTAINMENT & MONITORING>TELEMATICS SYSTEM>OPERATION .
  7. Check the LED illumination status of the telematics button. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW>CHECK>LED ILLUMINATION STATUS LIST .
About FixVault